Xprinter Xpn160ii Driver [2021]

If the official site is down or difficult to navigate, many reputable POS hardware resellers host the drivers on their servers. Ensure you are downloading from a site that specializes in POS hardware.

Try switching from a USB 3.0 port (blue) to a USB 2.0 port (black). Replace the USB cable if the error persists. The Cash Drawer Won't Open

Before we dive into the "how," let’s talk about the "why."

If you continue to experience issues after following this guide, the problem may be physical—check your USB cable (replace it if longer than 3 meters), or inspect the thermal head for dust. But in 95% of cases, reinstalling the correct driver solves every problem. xprinter xpn160ii driver

⭐⭐⭐⭐☆ (4.5/5)

Download the driver package matching your operating system (Windows, macOS, or Linux).

Several reputable driver aggregation sites also host the official drivers, which can be a good alternative if the official site is slow. Here are some examples with their supported Windows versions: If the official site is down or difficult

: Click "Install." Once finished, it is highly recommended to click "Print Test Page" to verify the hardware and software are communicating correctly. Network & WiFi Setup For users with the WiFi or Ethernet version of the

Select your Windows version (e.g., Windows 10/11). Select Printer Model: Choose or an 80mm thermal printer series (e.g., POS-80).

Ensure the printer is turned off before plugging it into your computer. Replace the USB cable if the error persists

Choose the installation directory or leave it as the default path, then click and Install . Configuring the Printer Model

If you encounter issues with the Xprinter XPN160II driver, here are some common problems and solutions:

USB, Ethernet, or Bluetooth (depending on your specific sub-model) Printing Speed: 160mm/s Command Set: Compatible with ESC/POS Official Xprinter XP-N160II Driver Download

The power light is green, but the error light blinks three times. Solution: The thermal head is overheated OR the paper cover is open. More critically, this can happen if the driver sends a "cut" command before the paper is fully positioned. Update your driver to version 5.1.8 or newer.