Click on . The software will read your UFS box serial number and chip details.
: Manually point the Windows "Found New Hardware" wizard to the SarasSoft\UFS\UFS_USB_Driver folder.
| Error Code | Description | Solution | | :--- | :--- | :--- | | | Dongle not detected | Re-run Zadig; ensure USB cable is data-capable (not charge-only). | | Err: 0x0A3 | Protocol mismatch | You are trying to read a UFS 3.1 chip. v02.10 supports up to UFS 3.0. Downgrade chip or wait for v03.x. | | WinError 5 | Access Denied | The software failed to write to C:\Windows\System32\drivers . Temporarily disable UAC and run as Admin. | | Loader Timeout | Firehose programmer rejected | The target device is in a conflicting secure boot state. Use a blank SBL (Secondary Boot Loader) method. |
If the software freezes or fails to identify your hardware, follow these troubleshooting steps:
Click on the button. The software will detect your UFS box serial number and check the status of the HWK module. Click on Update HWK . UFS 2.10 HWK Support Suite Setup v02.10
Open the newly installed from your desktop or start menu. Click "Update/Check" to connect to the server.
Finally, the moment of truth arrived. With a sense of pride and accomplishment, Mark clicked the "download" button, and the UFS 2.10 HWK Support Suite v02.10 software package began to download.
Are you facing any specific on the screen? Share public link
Define your installation paths (e.g., Application Install Path and your Nokia flash file directories). Click to map structural modules. Click on
To successfully set up v02.10, the following environment is typically required:
Navigate back to the "Hardware" tab and click . Confirm "Box Status" reads "True" and "Server Status" reads "Support Ok".
If you have previously attempted to install older or modified versions of the UFS drivers, you must purge them. Uninstall any existing UFS suites via the Windows Control Panel, restart your PC, and use a registry cleaner to wipe residual SarasSoft entries. Step 2: Install UFSx HWK Support Suite v02.10.000
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. | Error Code | Description | Solution |
The HWK module is physically loose or missing inside the box.
EEPROM dumping, direct network unlocking, IMEI repair, firmware flashing. LG (Legacy GSM variants) Baseband flashing, NVRAM calibration, code reading. SeDBx Sony Ericsson
Re-authorizes and updates the internal box firmware against official databases to unlock the usage of the wider flashing tools. Prerequisites Before Installation
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. UFSx_Support_Suite_Setup_v02.03.00.03