Press to cycle to the desired time slot (e.g., WAKE).
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The BAYSENS019C functions as a 7-day programmable digital thermostat capable of managing single or multi-stage conventional systems, heat pumps, and specialized Trane commercial units. Key Specifications:
($390–$425 approx.) because Trane’s communication protocol is proprietary. trane baysens019c manual
: Supports 7-day, 5+2 day, or 5+1+1 day options with up to three occupied/unoccupied event pairs per day. System Modes
The Trane BAYSENS019C is a programmable zone sensor used widely with Trane commercial heating, ventilation, and air conditioning (HVAC) systems. It is commonly paired with Voyager and Precedent rooftop units (RTUs). This guide provides a comprehensive overview of its features, programming steps, wiring configurations, and troubleshooting methods. Technical Specifications and Overview
Push any excess wire back into the wall cavity. Seal the hole in the wall with insulation or caulk to prevent drafts from affecting temperature readings. Press to cycle to the desired time slot (e
The Trane BAYSENS019C is a standard, programmable electronic zone sensor used widely in commercial and residential HVAC applications. It provides precise control over Trane heating, cooling, and ventilation units.
Includes On (continuous) and Auto (cycles with heat/cool) modes. Temperature Ranges: Cooling: 45°F to 98°F. Heating: 43°F to 96°F.
If you change the temperature, press the HOLDTEMP button within 20 seconds to make the change permanent until the next scheduled period. Programming Schedule If you share with third parties, their policies apply
Press the HOLD button, then adjust the temperature using the arrows. The thermostat will lock into this temperature indefinitely until you press HOLD again to release it. 4. Wiring and Terminal Configurations
The official Trane BAYSENS019C manual (often referenced as a sub-document within larger installation instructions or as part of the BAS-SVX or ACC-SVN series) is essential for:
: Set distinct times for Morning, Day, Evening, and Night.
The supply fan runs continuously, ensuring constant air filtration and circulation.
: Many versions allow you to "Copy" one day's schedule to another to save time during setup. Exit and Save Run Program or wait for the screen to time out to save your settings. Common Troubleshooting & Operation Tips