Thorens Td124 Service Manual -

Clean the linkage levers underneath the chassis. Old grease turns hard and locks up the speed selector switch.

You have two options when hunting for a :

If the rubber is still pliable, chuck the idler wheel axle into a drill and spin it gently against fine 400-grit sandpaper to remove the oxidized outer layer and eliminate minor flat spots.

Fill the well with a few drops of medium-viscosity oil (ISO VG 46 or 68) and reinsert the pulley. It should spin with zero restriction. The Idler Wheel

Remove the circlip holding the stepped pulley in place. Pull the pulley up off its shaft. thorens td124 service manual

The motor is a precision 4-pole synchronous unit.

The idler must be perfectly round, clean, and compliant. The manual explains how to adjust the stepped pulley height so the idler wheel aligns perfectly with the four speed steps (16, 33, 45, and 78 RPM). Main Platter Spindle Bearing

Clean the shaft and internal bronze bushings with alcohol. Apply 2-3 drops of light turbine oil to the shaft and reinstall. The Idler Wheel

Here are the technical specifications of the Thorens TD 124: Clean the linkage levers underneath the chassis

Bake the motor shells in a small toaster oven at a low temperature (around 80°C / 175°F) for an hour to draw old oil out of the porous sintered bronze bushings, or submerge them in an ultrasonic cleaner.

4.3 kg (11 lbs) cast iron (MkI) or non-magnetic aluminum (MkII/Optional)

Be cautious, as many online searches lead to manuals for the modern Thorens (direct-drive) model. This is a very different turntable with a modern motor, and its documentation will not help with a vintage unit. Stick to the original TD 124 (idler-drive) manual from AnalogDept. For those who prefer a physical copy, the manual can also occasionally be found in the original or reproduced form on sites like eBay.

For the Thorens TD124 Go to product viewer dialog for this item. Fill the well with a few drops of

Here are three horror stories from TD124 owners who skipped the manual:

Ensure the small cloth or rubber belt connecting the pitch knob to the crescent magnet is intact and responsive.

: If your belt is making a "slapping" noise, the manual suggests passing it through a small amount of talcum powder to absorb moisture and ensure a smooth start.

A heavy-duty, four-pole induction motor that spins at high speeds.