Technika Spb112 User Manual

The is a straightforward, user‑friendly Bluetooth speaker that offers reliable wireless audio for everyday listening. With the instructions in this guide, you can confidently pair it with any Bluetooth device, use the AUX‑in feature, and resolve most common issues without needing the original paper manual.

A: A solid green light means the speaker is in AUX-in mode . This is for when you use a cable. To use Bluetooth, you need to press the Power/Mode button repeatedly until the light turns blue .

: Some users have reported issues with Windows 7 or older laptops requiring specific drivers that aren't always available. It typically works best with smartphones and tablets .

Do not expose this electronic apparatus to dripping, splashing, or high-humidity environments. technika spb112 user manual

: Usually located near the base or buttons, informing you of pairing, fully-charged, or low-power cycles. Powering and Charging Your Device

: On your phone or tablet, go to Bluetooth settings and search for new devices.

Clean the exterior body using only a dry, soft microfiber cloth; never use liquid chemical solvents. This is for when you use a cable

: This device is for indoor use only; do not expose it to liquids or high humidity.

| Problem | Likely Cause | Solution | |---------|--------------|----------| | | Battery is completely depleted | Charge the speaker for at least 2 hours using the included USB cable and a standard USB power source. | | LED shows blue+red flashing but no connection | Speaker is in pairing mode but no device is connecting | Ensure Bluetooth is enabled on your source device and that you have selected “SPB112 IGNIS” . Delete the speaker from your device’s Bluetooth list and try pairing again. | | Audio cuts out or is distorted | Distance too great (beyond 10 metres) or obstacles (walls, metal objects) | Move the source device closer to the speaker. Remove any physical obstructions. | | No sound in AUX‑in mode | Cable not fully inserted; source volume very low | Push the 3.5 mm plug firmly into both devices. Raise the volume on your source device. | | Speaker connects but no sound | Source device may be sending audio to a different output | On your source device, ensure the Bluetooth output is selected. On a Mac/PC, check the sound output settings. | | Cannot pair with a second device | Speaker is still connected to the first device | Disconnect Bluetooth on the first device (or turn it off), then put the speaker into pairing mode again. | | Microphone not working for calls | Not selected as default communication device (on computers) | On a PC/Mac, go to Sound Settings and set the Bluetooth speaker as both Output and Input device. |

:

Check that all audio cable connections are pushed firmly into their respective ports.

Press the button repeatedly until the LED light flashes rapidly (indicating pairing mode).

The SPB112 can only be actively connected to device at a time. To pair with a new device: It typically works best with smartphones and tablets

: Look for "SPB112" or "BT Speaker" in the list and select it.

: Open the Bluetooth settings on your device (phone, tablet, or laptop). Look for a device named " BT-SPEAKER " and select it. Wired Connection