The timer automatically executes your programmed schedules based on the current time.
Press the button once. The screen will display 1 ON in the bottom left corner.
Note: Always check the actual label on your device, as terminal numbering may vary slightly.
Press the small button using a paperclip. This clears any factory testing data and prepares the memory. 2. Setting the Current Time and Day Hold down the Clock button throughout this entire process. sinotimer tm630s manual
Proper wiring is essential for safe and reliable operation.
To program the SINOTIMER TM630S, follow these steps:
The SINOTIMER TM630S offers various operating modes, including: Note: Always check the actual label on your
Press the C/R (Cancel/Recall) button 4 times quickly. The "a" or lock icon on the screen will disappear. 2. Setting Current Time Press and hold the CLOCK button. While holding CLOCK , press: D+ (Day): Set the current day of the week (Mo, Tu, We...). H+ (Hour): Set the current hour. M+ (Min): Set the current minute. S+ (Second): Set the current second. 3. Setting ON/OFF Events Press P (Timer) once; "1 ON" appears.
rapidly. The small "a" or lock icon on the screen will disappear. 2. Setting the Current Time and Day Hold down the (Week) until the correct day appears (e.g., MO, TU, WE). (Hour) and (Minute) to set the local time. (Second) to adjust seconds if required. 3. Programming the Timer (ON/OFF Cycles) (Timer) button. You will see "1 ON" on the display.
CR2450 (Keeps program memory during power outages). Display: Large LCD screen. Wiring and Installation Diagram To program the SINOTIMER TM630S
Hold down the CLOCK button and press the S+ button to sync seconds if exact precision is required. How to Program On/Off Timers
: If you want your programs to run automatically, make sure your screen is set to either
: Hold the Clock button and press D+ until the correct day of the week is displayed.