Simco Fmx002 Manual Full !exclusive! Link

The Simco FMX-002 is a battery-operated, conductive-cased device designed for precise measurement of static electricity at a 1-inch distance using LED guide lights. It features a

Press ZERO and POWER simultaneously. The unit will beep twice, and "Hi" will flash on the screen to indicate ion balance mode. Maintenance and Cautions

The SIMCO FMX-002 stands out for its precision and ease of use. Equipped with a built-in microprocessor, it ensures accurate measurements while remaining light and portable. Its anti-static material housing and a grounding buckle provide reliable results even in sensitive ESD work areas. Whether you’re auditing a workstation or troubleshooting an ionizer, the FMX-002 delivers reliable data. For safety and device longevity, always operate within the specified environmental conditions: a temperature range of 10°C to 40°C and relative humidity below 60%.

Below is a guide based on the core functionality shared across this series of Simco-Ion Handheld Fieldmeters. simco fmx002 manual full

If the meter is not grounded, it will pick up static from the operator, leading to false high readings.

0 to ±1.49 kV (Low range) and ±1.0 kV to ±20.0 kV (High range). Accuracy: ±10% within the standard measuring distance.

Note: Zeroing won't work if the reading is already high (>50V) or if "HOLD" is active . 2. Taking a Measurement Maintenance and Cautions The SIMCO FMX-002 stands out

Blow compressed air gently into the aperture if dust accumulates.

For detailed calibration or professional repair, contact authorized service providers like Micro Precision or refer to official Simco-Ion documentation . FMX-004 - Simco-Ion

(often succeeded by the FMX-003 and FMX-004) is a handheld electrostatic fieldmeter used to measure static charges in industrial environments. It uses an oscillating voltage sensor to detect the strength and polarity of surface charges. 📋 Technical Specifications Up to (20,000V). Measuring Distance: Exactly 1 inch ( ), guided by two integrated LED ring lights. Power Source: 9V Manganese battery (typically 6F22). attach the ion balance plate.

Resets the baseline measurement value to zero volts.

0 to ±1.49 kV (Low range); ±1.0 kV to ±22.0 kV (High range). Measuring Distance: 1 inch ±1/64 inch (25mm ±0.5mm). Response Time: Less than 1 second. Display Refresh Rate: 5 times per second. Accuracy: ±10% of reading. Power Source: 9V Manganese battery (6F22Y). Weight: 140g (including battery).

The safest source is the official ITW Simco Ion website. Navigate to their “Resources” or “Discontinued Products” section, as the FMX-002 has largely been replaced by the FMX-004. However, they keep legacy manuals available.

To measure the efficiency of ionizers, attach the ion balance plate.