Rok Power Washer Instructions Work (2024)
Running a pressure washer pump dry will instantly destroy it. Always purge air from the system before turning the power on: Turn on your household water tap completely. Leave the power washer switched . Squeeze the spray gun trigger.
Connect a standard garden hose to the unit's water inlet. Turn the water faucet on fully before starting the motor/engine. 3. Starting the Unit
Ensure the soap nozzle is being used. Clean the soap tube and filter. rok power washer instructions
| Problem | Most Likely Cause | Solution | | :--- | :--- | :--- | | | The GFCI plug has tripped. | Press the "RESET" button on the plug. If it won't stay reset, you may need a new plug. | | Motor Runs, But No/Low Pressure | Clogged nozzle or air in the line. | 1. Use the provided cleaning needle or a paperclip to unclog the nozzle. 2. Squeeze the trigger to purge air. 3. Check for kinks in the hose. | | Pressure Pulsates/Surges | Inadequate water supply. | Make sure your garden hose is fully turned on and not kinked. | | Water Leaks from Gun/Wand | A missing or damaged O-ring. | Inspect the rubber O-ring inside the gun's coupler. Replace it if it is cracked or missing. | | Detergent Won't Siphon | You are using the wrong nozzle. | Ensure the black, low-pressure soap nozzle is attached to the wand. |
Place your Rok pressure washer on a , within five feet of a water source and close enough to a grounded electrical outlet. Always operate the unit upright on its wheels or feet , as laying it on its side can damage internal components. Running a pressure washer pump dry will instantly destroy it
Proper preparation is the most critical step to protect your pressure washer's pump from damage.
To summarize all key , here is a quick reference checklist: Squeeze the spray gun trigger
If the spray pattern becomes distorted or pulsing occurs, the nozzle may be clogged. Turn off the machine, disconnect the nozzle, and use a straightened paperclip or a nozzle cleaning tool to clear out debris from the tip hole. Rinse with water.
Switch to a high-pressure nozzle (such as green or white) to rinse the soap away, working from the top down. 5. Post-Operation and Depressurization