I can provide the exact code list or custom troubleshooting steps for your exact setup.
Enter the code using the keypad. The LED will flash twice. Press the AUD (or desired audio source) device button.
The current code might only offer partial compatibility. Repeat the programming process using a different code from the list.
You can reassign keys (like the [AUX] key) to control different device types, such as a second TV or DVD player. px-rc1 remote control manual
Hold and the Device Button (TV/AUX) simultaneously until the light stays on. Enter the Code using the number pad. If the code is correct, the light will turn off.
Since the PX-RC1 is generic, here is the default mapping for the version.
The manual serves as a diagnostic tool for when the "bridge" fails. If a code is entered but the remote does not operate the TV, the manual recommends repeating the process with alternative codes, as brands often share multiple code sets. Keeping a physical list of these codes is a suggested best practice to avoid future reprogramming delays. I can provide the exact code list or
Press and release the matching your equipment (e.g., TV ). The indicator light will flash once and remain lit.
Note: Replace the batteries if the LED indicator light becomes dim or if the remote stops responding consistently. 2. Direct Code Entry Method
As soon as the device turns off, press the button to lock in the code. The indicator light will turn off. 4. Master Volume Control (Volume Punch-Through) Press the AUD (or desired audio source) device button
Tv - Check out June 2009 Consumer Electronics Questions - Page 5
Try alternative codes from the brand list; the first code that works might not support all secondary functions. The LED Blanks or Doesn't Light Up at All
This is the most searched issue. Do not throw the remote away. Try these steps in order.
You may need to reset the volume lock. Press and hold the TV button and the VOL + button together until the LED flashes twice to route volume control back to your television.