Prosecure Opti Combi Manual English Jun 2026

Proper placement prevents false triggering and ensures maximum safety field coverage. Step-by-Step Mounting

Use the mechanical click-wheel adjustment to move the safety curtain closer to or further away from the door blades.

Lower the sensitivity (C2-1) or adjust the mounting angle to avoid detecting movement from cross-traffic. for a particular door operator model?

: Check the 12-24V power supply and cable connections. prosecure opti combi manual english

This manual provides a foundational understanding of the product. For detailed, model-specific wiring diagrams, advanced configuration options (e.g., setting radar sensitivity, adjusting the IR curtain's field of view), and comprehensive safety instructions, you must refer to the complete, provided by dormakaba with your product.

Secure the sensor chassis to the header using the provided screws. Do not overtighten, as this can warp the plastic housing. 4. Wiring and Harness Connections

1.8 meters to 3.0 meters (5.9 feet to 9.8 feet). Supply Voltage: 12–24 V AC ±10% / 12–30 V DC ±10%. Power Consumption: < 3.2 VA / < 2.5 W. Output Relays: Motion: Solid-state relay (50 V DC / AC max, 100 mA max). Presence: Solid-state relay (50 V DC / AC max, 100 mA max). for a particular door operator model

Use the manual adjustment screw to align the safety curtain. The safety field must look directly downward, passing immediately in front of the moving door leaf without hitting the door itself. 5. Setup and Calibration Routine

Disclaimer: This is a compiled feature summary based on typical Prosecure Opti Combi documentation. Actual features vary by firmware version, regional model, and optional modules. Refer to your unit’s official manual for exact specifications and safety instructions.

Clear the threshold. Check for reflective mats or bright lights directly under the sensor. Cycle power to recalibrate. No power supply voltage. model-specific wiring diagrams

The ProSecure Opti Combi is a high-performance, combined radar and active infrared sensor used widely for automatic door activation and safety. This comprehensive guide provides everything you need to install, wire, program, and troubleshoot the sensor using the official English programming parameters. Technical Specifications Specification Radar (Motion) + Active Infrared (Presence) Mounting Height 1.8 meters to 3.0 meters Power Supply 12–24 V AC ±10% / 12–30 V DC Output Contacts Relay (Activation) + Solid State Relay (Safety) IP Rating IP54 (Weatherproof housing) Mechanical Installation Steps 1. Position and Mount the Sensor Use the provided mounting template on the door header. Drill the wire entry hole and mounting screw pilot holes. Ensure the sensor centers perfectly over the door opening. Mount the back plate securely to the flat surface. 2. Route the Cable Thread the multi-core cable through the wire entry hole.

meters depending on the specific model and safety standards (e.g., DIN 16005).

The ProSecure Opti Combi uses a color-coded wiring harness to connect directly to the automatic door controller. Wire Color Connection Type Power Supply 12-24V AC / 12-30V DC (Non-polarized) Black Power Supply 12-24V AC / 12-30V DC (Non-polarized) White Activation Output COM (Common Relay) Yellow Activation Output NO / NC (Normally Open / Closed) Green Safety Output COM (Solid State) Grey Safety Output NO / NC (Solid State) 4. Mechanical Adjustments