Click to generate a custom configuration profile (usually saved as MP.ini ), then close the parameter editor. Click Update on the main dashboard to display your connected USB drive in one of the status grid boxes. Click Start to initiate the flashing cycle.
: Always use a tool like ChipGenius or Flash Drive Information Extractor to confirm your controller model (e.g., PS2251-XX) before attempting to use MPALL.
stands for Mass Production All-in-one . It is a low-level firmware flashing and partitioning utility designed specifically for Phison controllers. Unlike simple formatting tools, MPall communicates directly with the controller chip, bypassing the operating system’s logical layer.
Ensure the vendor says and note down the specific MP chip number (e.g., PS2251-67 ). Also, write down the Flash ID (e.g., Toshiba TC58NVG6T2HTA00 ), as you will need this to select the correct firmware. Step 2: Download and Install Phison MPALL v3.70.0e Phison Mpall V3.70.0e
If the vendor reads and the part number matches formats like PS2251-67 , PS2251-68 , PS2251-03 , or PS2251-07 , your drive is highly compatible with the MPALL v3.70.0E ecosystem. Preparing the Necessary Files
Instead of manually editing raw .ini configuration files, use the built-in parameter editor tool provided in the software package. Open the folder containing the extracted MPALL software. Run as an Administrator. Choose Advance Setting and select New Setting .
Overriding software-level write locks that prevent formatting or file deletion. Click to generate a custom configuration profile (usually
Phison MPALL v3.70.0e is a powerful tool that can revive seemingly dead USB drives, saving you money and reducing electronic waste. By accurately identifying your Phison controller chip and following the step-by-step flashing process, you can bypass persistent write-protection errors and restore your storage device to pristine factory condition. If you want to move forward with the repair, let me know: Your from ChipGenius The Flash ID code or memory manufacturer The exact error message your USB currently gives you Share public link
Completely free and widely available in technical communities.
We’ve all been there. You plug in your USB flash drive, and instead of seeing your files, you get an error: “Please insert disk into removable drive” or “0 MB capacity.” Your heart sinks. The drive appears dead. : Always use a tool like ChipGenius or
What is the exact listed for your NAND memory?
If the drive is completely dead (no LED light), you may need to manually short the pins on the controller chip to force it into "Test Mode" before Windows can see it. Error: "Flash Burner Error"
Software cannot write parameters due to a frozen controller loop.
For the latest, verified tools, I recommend visiting the USBDev.ru Phison Section .
For flash drives running on Phison controllers, is the definitive mass production tool used to reflash the firmware, reset the controller, and restore dead USB drives to factory settings.