Manual: Kincaid Radio Controlled Clock Instruction

Practical items:

The hands will rapidly spin forward and stop automatically at a default position (usually 4:00, 8:00, or 12:00). This indicates the clock is in "receive mode."

If your Kincaid shows the wrong time after three nights: kincaid radio controlled clock instruction manual

Switch this OFF if you live in Arizona, Hawaii, or parts of Indiana/Canada that do not observe Daylight Saving Time. How to Set the Time Manually

: Hold the button for rapid movement or press it repeatedly for minute-by-minute adjustments. Practical items: The hands will rapidly spin forward

Setting up a follows a standard procedure typical for analog and digital atomic timepieces that synchronize with the WWVB signal from Colorado. Quick Setup Instructions

The hour digits will begin to flash. Use the UP/DOWN or ADJUST buttons to change the hour. Press SET again to move to minutes, year, month, and date. Setting up a follows a standard procedure typical

If you moved the clock to a new location or want to force a sync immediately:

If you live outside the WWVB signal range or need to use the clock immediately before it completes an automatic sync, you can set the time manually. For Analog Kincaid Clocks

Once the signal is successfully captured, the hands will fast-forward to the correct local time, or the digital display will stabilize. Section 3: Manual Settings and Adjustments