Kes Geyser Load Control Timer Manual New [best] (POPULAR · WALKTHROUGH)

While holding , press M+ to set the exact current minute.

For more detailed technical data or model-specific variations, you can refer to manufacturers like HellermannTyton who produce similar load controllers. HellermannTyton for maximum energy efficiency? Geyser Timer Load Controller - HellermannTyton

Press the button to save and return to the main display. 3. Understanding the Override Option

The timer display should show which mode it's currently in: kes geyser load control timer manual new

To clear it, press the button while viewing that program slot. The display will show lines ( --:-- ), indicating the slot is cleared.

Once your schedule is programmed, ensure the timer is set to "Auto" or "Program" mode. This setting allows the timer to follow your set schedule automatically.

). It is highly recommended that a qualified electrician installs this device to ensure safety and compliance with electrical regulations. 1. Preparation While holding , press M+ to set the exact current minute

A: Check if the MODE is set to AUTO and that a program exists (e.g., P1 ON 06:00, OFF 08:00). Also verify the load limiting is not set too low and that R1/R2 is not erroneously shorted.

: Press the override button to heat water for 60 minutes. Note that the override will not function during peak demand "lock-out" times to prevent strain on the grid.

Press repeatedly until you find the specific program number you wish to change. Geyser Timer Load Controller - HellermannTyton Press the

The device indicator is set to "OFF" instead of "AUTO".

Press until the exact same day combination matches your "1_ON" selection. Note: If the days do not match perfectly, the timer will fail to execute.

The KES timer is solid-state, but these habits extend its life: