Icom Cs-f3161 F5061 Programming Software |top| Download Jun 2026

To use the Icom CS-F3161 F5061 programming software, follow these steps:

IDAS digital multi-site conventional and trunking mobile transceivers. Where to Download the Software Safely

VHF and UHF premium portables featuring multi-mode operations.

Software alone will not connect your PC to your radio. You must source the correct programming cables and drivers. For Portable Radios (IC-F3161 Series) OPC-1862 (USB type) or OPC-966 (Serial type). icom cs-f3161 f5061 programming software download

The Icom CS-F3161/CS-F5061 software is a proprietary "cloning utility" designed for a specific generation of Icom land mobile radios (LMR). Because the portable (F3161) and mobile (F5061) units share the same internal architecture and firmware structure, they utilize the exact same software package. Supported Radio Models

I can provide the specific step-by-step instructions or troubleshooting help for your exact scenario. Share public link

Connect the cloning cable to your computer and the radio. Turn the radio on. Open the Software: Launch the CS-F3161/F5061 software. To use the Icom CS-F3161 F5061 programming software,

Icom America or your authorized Icom dealer. Part Number: CS-F3161 (Clone) or CS-F3161 (Advanced) Price: Approximately $75–$120 USD.

), you can program 6.25kHz digital trunking, Unit IDs for individual calling, and RAN codes—the digital equivalent of CTCSS Safety Features

Before opening the software, install the Silicon Labs CP210x or FTDI drivers (depending on your cable). You must source the correct programming cables and drivers

Even when you have the software, making your radio talk to your PC is the next critical step. This requires the correct USB driver and a compatible cable.

Before writing any changes, always the existing configuration from the radio.

If you need the software for a radio you already own, contact Icom technical support with your radio’s serial number. For basic frequency or settings changes, consider asking a local radio shop to program it for you.

The CS-F3161/F5061 programming/cloning software is an essential tool designed to customize Icom's F3161/F4161 (handheld) and F5061/F6061 (mobile) radio series. It provides a user-friendly interface to manage frequencies, configure advanced settings, and optimize communication protocols across both analog and digital platforms. Supported Radio Models Go to product viewer dialog for this item. Go to product viewer dialog for this item. Go to product viewer dialog for this item. Go to product viewer dialog for this item. Mobile: Go to product viewer dialog for this item. Go to product viewer dialog for this item. Key Features of the Programming Software