Check Device Manager. Ensure your cable driver does not have a yellow exclamation mark. Re-select the correct COM port inside the software settings. "Model Mismatch" Error
Select the exact number you noted earlier in the Device Manager.
Open to find the assigned COM Port number (e.g., COM3). Turn off your HYT TC-508 radio.
Finding a reliable can be challenging, as official software is sometimes locked behind dealer portals. This guide provides an overview of the software, where to look, and how to program your radio. What is the HYT TC-508 Programming Software?
: Open the CPS, select the correct COM port, and choose Programming -> Frequency Reading to pull the current settings from the radio. Edit Parameters : Modify settings such as: Hyt Tc-508 Programming Software Free Download
Always backup your current configuration before making changes. Click the icon or go to Program > Read from Radio . Wait for the progress bar to complete.
The is a professional two-way radio used in commercial, industrial, and public safety applications. Programming these radios requires Hytera’s proprietary CPS (Customer Programming Software) . The software is not legally available for free public download from Hytera’s main website; it is restricted to authorized dealers, service centers, or verified end-users under license.
Turn off your HYT TC-508. Plug the 2-pin connector firmly into the side microphone/speaker jack. Turn the radio on and set the volume to a medium level. In the software, click the icon (or go to Program -> Read ). A progress bar will appear as the software pulls the factory configuration from the radio. Step 4: Backup the Factory Codeplug
You need a USB-to-2-pin cable compatible with HYT/Hytera. These are widely available and often use the same pinout as Kenwood-style connectors. Check Device Manager
Enter your authorized frequencies in the and Tx Frequency columns.
The driver for the programming cable must be installed on your computer so it recognizes the cable (often Prolific or FTDI drivers). Windows Computer: The software is designed for Windows OS. How to Program Your HYT TC-508: Step-by-Step
If you encounter errors like "Model Mismatch" or "Communication Fail," check the following solutions:
A: No. Hytera (parent company) provides software only through dealer portals. "Model Mismatch" Error Select the exact number you
If your software version is older than the firmware version installed on the physical radio, the software will fail to read the device. Ensure you are using the latest version of the TC-508 CPS.
Using the wrong regional software version can "brick" your radio, making it completely unusable.
Install the USB cable driver on your PC before plugging in the cable. Restart your computer. Install the HT508 CPS software setup file. 2. Connect the Hardware Plug the USB cable into your computer.
The TC-508 programming software is a commercial product distributed by Hytera and its authorized partners. Therefore, while it isn't freely available, you can acquire it through two legitimate means:
Check your Windows Device Manager to verify the exact COM port number assigned to the cable. Match this number in the software settings. If a yellow exclamation mark shows up, reinstall the USB cable driver. "Connection Timeout" or "No Response"