Channels Under Playback Reached __hot__ | Hikvision Maximum Number Of

Here are the most effective solutions, ordered from simplest to most advanced. Method 1: Close Unnecessary Playback Channels

If you are using a Hikvision Network Video Recorder (NVR), Digital Video Recorder (DVR), or the iVMS-4200 software, you may have encountered the error message:

To prevent this issue in the future, always check the decoding capabilities listed in your Hikvision model's datasheet. Manufacturers list this specification clearly under the "Decoding" section.

Low resolution (e.g., CIF or 1080p) used for fluid multi-camera live viewing. hikvision maximum number of channels under playback reached

The quickest workaround is to view fewer cameras at the same time. If you select an entire 8-channel or 16-channel view for playback, the system will easily overload. Deselect all cameras in your playback menu.

You are viewing playback on the local HDMI monitor (using 8 channels), while a remote user via iVMS-4200 is also playing back 8 channels. Total = 16, hitting the decoder limit.

Using older video compression codecs like H.264 forces the recorder to work much harder during playback. Enabling H.265 or H.265+ compresses the file size significantly, freeing up hardware decoding resources. Here are the most effective solutions, ordered from

Security cameras capture two types of streams simultaneously:

This is the most effective solution for "stuck" connections. Restarting the device clears the temporary network connections and resets the streaming count.

If you manage a security system using Hikvision DVRs, NVRs, or the iVMS-4200 client software, you may have encountered a frustrating pop-up error: Low resolution (e

A previous session didn't close properly, and the NVR still thinks a user is viewing a channel.

To resolve this issue and restore full playback functionality, consider the following steps:

If basic fixes don't resolve the issue, proceed with these more advanced steps: