Usually black or red. This wire carries power from the switch to your light fixture.

| Symptom | Likely Cause (from original troubleshooting guide) | |---------|-----------------------------------------------------| | Dial does not turn | Missing neutral connection (terminal 3) | | Load stays on | Trippers missing, loose, or set at same time | | Load never turns on | Trippers reversed (ON inserted into OFF slot) | | Buzzing sound | Overload or loose line connection |

Turns the connected load on or off immediately. Setting a Countdown Press the UP or DOWN arrows to wake up the screen display.

Press the (Program) button once. You will see "1 ON" appear on the screen, indicating the start time for your first program.

: Typically white; often found bundled with a wire nut in the back of the box. Ground : Bare copper or green wire. Connect Timer : Connect the Line wire to the Black lead on the timer. Connect the Load wire to the Blue (or Red) lead. Connect the Neutral wire to the White lead. Connect the Ground wire to the Green lead.

Return to your main electrical panel and flip the circuit breaker back to the "ON" position. The digital screen on the timer switch should light up or display numbers. Programming Instructions