Logic Trace System by The Logic Group
Logic Trace System by The Logic Group
Logic Trace System by The Logic Group
docker run -d --name public-app -p 3000:3000 --restart unless-stopped your_app_image
: Updating local repositories and ensuring dependencies (like OpenSSL or specific libraries) are present. Package Acquisition : Downloading the fusion13combined binary or installer. Network Configuration Binding the service to the Configuring Firewall Rules
Some operating systems, notably certain builds of Windows 11, may experience installation hangs because they cannot connect to the internet or a network share when the default NAT (Network Address Translation) network adapter is used. By switching to a bridged network, the virtual machine can directly communicate with your router to obtain an IP address and resolve this issue.
this term likely refers to a specialized manual configuration of VMware Fusion 13 Pro fusion13combined publicnet install
Before performing a Fusion 13 combined public net install, ensure that your machine meets the following prerequisites:
, you can create a custom segment to combine NAT and Host-only features: VMware Fusion > Settings and click the icon to create a new custom network (e.g.,
: Minimum CPU/RAM requirements (e.g., 4 cores, 16GB RAM for virtualization hosts). Operating System docker run -d --name public-app -p 3000:3000 --restart
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Setting up a "public" or shared network allows your virtual machine to access the internet through your Mac's connection. For Windows 11 (ARM) Users
The data backbone hosting currently booked inmate profiles, booking photos, and court calendars. By switching to a bridged network, the virtual
PublicNet deployments require strict firewall configurations to prevent unauthorized remote execution while maintaining open ports for peer-to-peer discovery. Firewall Setup (UFW)
Generate the default PublicNet genesis configuration profile:
The most popular size board has an active area of 44x60" (110x150 cm), smaller boards and larger boards are available. The boards are available in either 0.01"/.254 or 0.005"/.127 accuracy.
Everything you need is included the USB connector for computer, universal 110-240 power supply and international plugs. All you need is a Windows or Mac computer and a place to put the board.
The software is available on Windows 10/11 and Apple Mac with M-chip. The Logic Trace Software is easy to use and easy to learn. Tracing a part or pattern can be done by freehand drawing, lines, arcs, curve fitting through points and circles. Add any inside holes and save the vector file as a DXF, SVG, or PDF.
The software commands can be moved to a cellphone or tablet and placed on the tracing board for easy use.
The software is available in many languages including English, Spanish, French, German, Arabic, Hindi, Turkish, Italian, Greek, Korean, Japanese
The pen stylus provides an elegant way to trace along the edge of a part. The pen sends a stream of data to the software. The pen has 2 buttons on the side and a push down tip on the bottom. Available corded or cordless.
The cursor has a magnifying glass with a crosshair. Align the crosshair with the desired point to be traced and push a button. The cursor works well when tracing paper and cardboard patterns.
The buttons can be programmed to be different software commands. For example use the 0 button to trace, the 1 button to change to lines, 2 button for arcs and any command you desire.
Machine shops, Fabricators, Woodworking Shops, Textile and Apparel Manufacturers, Graphic Designers, Engravers
Plasma Cutters, Laser Cutters, CNC Routers, WaterJet Cutters, Fabric Cutters, Vinyl Printers, Plotters, Cricuts
Glass, Aviation, Marine, Paint Protection Film, Window Tint, Decals, Foam, Marble, Counter Tops, Furniture, Apparel, Upholstery, Textile, Die Cutting, Footwear, Leather, Art, Signs
People using Plasmacam, Vectric, Vcarve Pro, Autocad, Mastercam, Rhino, Solidworks, Sheetcam, Enroute, Flashcut, Sharper CNC, and many more
docker run -d --name public-app -p 3000:3000 --restart unless-stopped your_app_image
: Updating local repositories and ensuring dependencies (like OpenSSL or specific libraries) are present. Package Acquisition : Downloading the fusion13combined binary or installer. Network Configuration Binding the service to the Configuring Firewall Rules
Some operating systems, notably certain builds of Windows 11, may experience installation hangs because they cannot connect to the internet or a network share when the default NAT (Network Address Translation) network adapter is used. By switching to a bridged network, the virtual machine can directly communicate with your router to obtain an IP address and resolve this issue.
this term likely refers to a specialized manual configuration of VMware Fusion 13 Pro
Before performing a Fusion 13 combined public net install, ensure that your machine meets the following prerequisites:
, you can create a custom segment to combine NAT and Host-only features: VMware Fusion > Settings and click the icon to create a new custom network (e.g.,
: Minimum CPU/RAM requirements (e.g., 4 cores, 16GB RAM for virtualization hosts). Operating System
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Setting up a "public" or shared network allows your virtual machine to access the internet through your Mac's connection. For Windows 11 (ARM) Users
The data backbone hosting currently booked inmate profiles, booking photos, and court calendars.
PublicNet deployments require strict firewall configurations to prevent unauthorized remote execution while maintaining open ports for peer-to-peer discovery. Firewall Setup (UFW)
Generate the default PublicNet genesis configuration profile:
Several tracing methods are included in the software to make tracing easy and accurate.
Tracing and Curves - freehand drawing, whatever is drawn is recorded
Lines - Click the starting and ending points of the line
Arcs - Click the start, middle, and end of arc
Curves with points - digitize a curve as a series of points with the software connecting the points with a Bezier smooth curve
Circles - Define circles by either clicking any 3 points on the circle or by clicking the center point and inputting the diameter
To make the tracing easier, the software command window can be moved from the computer screen to a cellphone or tablet which can be placed on the tracing board. Simply click buttons on the cellphone or tablet without going back to the computer. This is especially useful when using large boards or the Jumbo multiple boards.
Active area tracing sizes, the boards are slightly larger
44x60" 110x150 cm **
36x48" 90x120 cm
24x36" 60x90 cm
20x24" 50x60 cm
12x18" 30x45 cm
5x8' 1.5x2.4m **
5x12' 1.5x3.6m
5x16' 1.5x4.8m
8x11' 2.4x3.4m
8x16.5' 2.4x5m
8x22' 2.4x6.6m
** Most popular
Most users will find the single boards large enough for their tracing needs. But some users will need large tracing systems especially in the glass, countertop, aviation, and marine industries.
The Logic Trace System has the ability to connect between 2 and 8 boards together for tracing very large patterns. The boards can be in one or two rows and even L shaped. The boards are calibrated so the software knows exactly how the boards are aligned.
For more information on the Jumbo, visit the Jumbo webpage.
A portable rollup is available but should only be used with the 16 button cursor and usually only for apparel pattern making
The Logic Trace Software also has the ability to load an image file or photo, set a scale, and trace the outline using the computer mouse. The same tracing methods are used - tracing, lines, arcs, curves through points and circles. Trace the outline with the mouse and save a scaled DXF, SVG, or PDF vector file. The tracing process is very similar to tracing the pattern on the tracing board except using the mouse and the computer screen.
The Logic Trace Software can also be used for tracing apparel patterns. Trace outlines, sew lines, notches, drill holes, and grain lines.
Save the traced outlines as DXF-ASTM, DXF-AAMA, DXF, PDF, SVG files. Then load the files into any apparel software including Gerber, Lectra, Optitex, Pad System, Tukatek, Clo3D, TukaCad, Bronzwear, Marvelous Designer, Pattern Smith, Smart Designer, Tailornova and more
Also the files can be loaded into any cad or design program including Adobe Illustrator, CorelDraw, Inkscape, and more
The boards are custom made for The Logic Group in Phoenix Arizona by GTCO Calcomp and usually are in stock. We ship to most countries.
In the USA we ship by freight truck and total shipping takes a few days.
In Canada we either ship by freight truck if the buyer has a Canadian customs broker or DHL if we need to the the DHL broker
In other countries we ship either by air freight delivered to your business, air freight to an airport, or DHL express to you business. Shipping is fairly expensive because of the large box or boxes. The shipper will arrange customs clearance and collect any customs fees.
John Walsh, Austin USA, +1 512-656-8195
,
Send a SMS message,
Message WhatsApp
[email protected] Send Email
John Haw, Northern Ireland, +44 7720 974993
,
Send a SMS message,
Message WhatsApp
[email protected] Send Email
Contact John Haw: [email protected] Send Email
Copyright 2025 The Logic Group Inc