Download the setup executable (usually a ZIP file containing an .exe file).
The FT231X is a USB-to-UART converter chip that provides a simple and efficient way to add USB connectivity to devices. It is a highly integrated chip that includes a USB controller, a UART (Universal Asynchronous Receiver-Transmitter) controller, and a voltage regulator. The FT231X supports data transfer rates of up to 3 Mbps and has a configurable baud rate generator.
Restart your Mac to ensure the kernel extension loads properly.
Open Device Manager -> Expand Ports (COM & LPT) -> Right-click your USB Serial Port -> Select Properties -> Go to Port Settings tab -> Click Advanced -> Change the Latency Timer (msec) from 16 down to 1 or 2 . Click OK to apply. ft231x usb uart driver link
This usually indicates a hardware communication failure or a driver conflict.
To make this hardware function correctly, your operating system requires the proper driver. This article provides a comprehensive overview of the FT231X USB UART driver, direct download links, installation procedures, and troubleshooting steps. Direct FT231X USB UART Driver Download Links
The FT231X is a workhorse of the electronics world, and keeping the correct driver link handy can save you hours of troubleshooting. With the official FTDI VCP driver installed, your development board should seamlessly bridge the gap between your code and your hardware. Download the setup executable (usually a ZIP file
The FT231X driver is a software component that enables communication between the FT231X chip and the host computer's operating system. The driver provides a virtual COM port (VCP) interface, which allows the host computer to interact with the FT231X chip as if it were a physical serial port.
Recent versions of macOS feature native Apple FTDI drivers, but they can occasionally conflict with specific development environments like Arduino IDE or ESP32 flashers. If you need to install the official FTDI driver package manually: Download the macOS .dmg file from the link provided above. Double-click the downloaded file to mount the disk image. Run the .pkg installer contained inside the image.
Connect the device and check to confirm it is detected. The FT231X supports data transfer rates of up
Follow the installation wizard prompts (Click 'Extract', then 'Next'). Click once the installation is complete.
Linux kernel 3.0.0-19 and above have the FTDI driver built directly into the kernel. No separate download is required. D2XX Direct Drivers
The FT231X is a popular USB to Full Handshake UART (Universal Asynchronous Receiver-Transmitter) bridge controller chip manufactured by . It is widely used to provide USB connectivity to legacy serial devices and is a staple component in development boards (such as Arduino derivatives), industrial controllers, and consumer electronics.