Wfc5790 Admin Password: Epson
Leaving the default serial number or admin password active makes your network vulnerable to unauthorized access. Create a strong, custom alphanumeric password.
Keep holding the button until the Epson logo or a special system recovery menu appears on the LCD screen.
Navigate to > Restore Default Settings . Choose All Settings to clear all network and password data. Select Yes to confirm and restart the printer. Method 2: System Administrator Menu Reset
This will erase all settings. Back up your address book via Web Config if you can log in. If you cannot log in, you will lose your contacts. epson wfc5790 admin password
Set a permanent IP address for the printer so you do not lose access to the Web Config portal when the router reboots.
Log in using the default credentials ( admin / admin or your serial number).
Choose (or Network Settings if you only want to clear network passwords). Confirm the choice and allow the printer to reboot. Leaving the default serial number or admin password
: If the printer is installed in a tight cabinet or mounted, reading the serial number from the rear label can be frustrating without moving the entire unit.
Press and hold the button and the Home button simultaneously.
If the default passwords do not work and you cannot remember a custom password you previously set, you must reset the printer’s system settings to factory defaults. If you still have access to basic menus: On the control panel, go to > General Settings . Scroll to the bottom and select Restore Default Settings . Navigate to > Restore Default Settings
If you cannot log in, you must perform a (also called a "Hard Reset" or "All Data Reset"). This will delete the admin password, network settings, address book, and job logs—but it will unlock the machine.
Click the Login button (usually in the upper-right corner or side menu), select Administrator as the user type, and enter the default credentials detailed above. How to Change the Admin Password (Recommended)
In rare cases, Epson locks the "Restore Default Settings" menu behind the admin password (a catch-22). If this happens, you must use a keyboard shortcut to perform a .