Epson L1300 Adjustment Program 69 Hot Jun 2026

Resetting the software counter does not physically clean the waste ink pads. After a reset, it is highly recommended to:

A prompt will appear asking you to turn off the printer. manually. Click OK on the computer screen.

Turn off the printer. Unplug it from the wall. Wait 30 minutes. This allows the head to cool physically. Plug it back in. If the printer starts normally and prints for 5 minutes before crashing again, you have a heat buildup issue (air bubble or drying ink). If it crashes instantly when powered on, you have an electrical short. epson l1300 adjustment program 69 hot

Resetting the electronic counter tells the printer that the waste ink pads are empty. However, the physical foam pads are still saturated with liquid ink.

To fix this, users often search for an This is a service tool used by technicians to reset the waste ink pad counter, perform head cleaning, and check ink levels. Resetting the software counter does not physically clean

It is important to first distinguish this from a simple paper jam. The error usually appears with these specific symptoms:

Continuous high-volume printing without breaks can cause the printhead nozzles to overheat. Click OK on the computer screen

Maya yanked the power cord.

A software reset does not physically clean the ink pads. To prevent ink from overflowing and damaging your hardware or workspace, it is recommended to clean or replace the physical absorbent pads after a reset.