Epson Adjustment Program L3156 Verified Now
If your L3156 is under warranty, running third-party service software immediately voids it. Epson can detect that the counter was reset.
The power light and the red paper/ink lights on the printer control panel will flash alternately or simultaneously.
Remove the screw, slide out the plastic tray casing, and extract the saturated felt pads.
The software cannot detect the printer. Check your USB cable connection, ensure the printer is turned on, and verify you selected the correct port in Step 2. epson adjustment program l3156
The Epson Adjustment Program is an unofficial, third-party distributed software utility that communicates directly with the printer's firmware. It bypasses standard user restrictions and allows access to service-mode functions, including:
The waste ink assembly box is located at the bottom rear section of the Epson L3156 housing. It is secured by a single screw beneath a small plastic access panel.
The printer refuses to scan, copy, or print any documents. Safety First: Physical Maintenance Warning If your L3156 is under warranty, running third-party
Ensure the Main pad counter box remains checked. Click the Initialize button. A warning prompt will appear asking for confirmation to clear the values; click OK .
Is your printer currently showing a specific or just flashing lights?
Leave the Port selection on or manually choose the USB port labeled with your printer's name. Click OK . Step 2: Navigate to the Maintenance Menu Remove the screw, slide out the plastic tray
Right-click AdjProg.exe → . The interface will open.
is a specialized utility used primarily to resolve the "Service Required" error. This error occurs when the printer's internal waste ink pad counter reaches its limit, effectively locking the device even if the pads are not physically full. Core Functionality
Scroll down the list until you find the section. Click on Waste ink pad counter . Click OK . Step 5: Check the Current Counter Value Look for the checkbox labeled Main pad counter . Check the box next to it.
You must connect the printer to your computer via a physical USB cable. Resetting via Wi-Fi or network connections will fail and can corrupt the printer firmware.