Eme Series 2000 Manual Jun 2026

IP65 certified on the front panel when properly flush-mounted.

Cause: Ambient temperatures outside of the cabinet are too high, or the internal cooling fan has failed.

: Standard models support either 120mm or 200mm widths. Max Roll Diameter : 270 mm.

Comprehensive Guide to the EME Series 2000 Label Applicator Manual

Eme Series 2000 – Operation and Maintenance Manual Eme Series 2000 Manual

Clean all pipe threads and flanges thoroughly to remove debris, metal shavings, or packing materials. Install high-quality isolation valves on both the suction and discharge sides of the unit to facilitate isolated maintenance. Apply a compatible, industry-approved thread sealant or gasket material, ensuring no excess material enters the fluid stream. Step 3: Electrical Integration

Operators and technicians must wear safety glasses, steel-toed boots, and chemical-resistant gloves appropriate for the fluid being handled.

Typically requires 230VAC 50/60 Hz power with a consumption of approximately 250W.

Inspect the immediate operational zone for foreign objects or debris. Startup and Calibration IP65 certified on the front panel when properly

(product/label combinations), significantly reducing setup and changeover times. Stepper Motor Drive

The Eme Series 2000 Manual, a now-obscure technical document from the late 1990s, offers more than operational instructions for an all-in-one educational media device. This paper argues that the manual serves as a cultural and technological artifact, revealing the aspirations, constraints, and pedagogical philosophies of the pre-digital, post-analog era. Through a close reading of the manual’s structure, terminology, and safety warnings, we explore how it bridged the gap between magnetic tape and CD-ROM, and between teacher-led instruction and student-driven interactivity.

Factory service center locations, return merchandise authorization (RMA) procedures, and what voids the warranty (e.g., using non-specified lubricants).

Equipped with an optional encoder (tacho) to automatically synchronize the labeling speed with varying conveyor speeds. 4. Operational Features and Options Max Roll Diameter : 270 mm

Improper installation is a primary cause of premature equipment failure. The installation protocol must be followed precisely to validate the manufacturer's warranty and ensure structural integrity. Pre-Installation Check

The EME Series 2000 is a microprocessor-controlled labeling system built to handle diverse industrial environments. Unlike older modular systems, all electronics are integrated directly into the machine housing, eliminating external connection cables and simplifying installation in confined spaces.

Lubrication points, filter replacement intervals, and belt tension checks. For the Eme Series 2000, common intervals are:

| Specification | EME 2120 Model | EME 2200 Model | | ------------------ | -------------------------------------------- | -------------------------------------------- | | | 20 - 120 mm | 20 - 200 mm | | Label Length | 20 - 250 mm | 20 - 250 mm | | Max Web Speed | 0 - 35 m/min | 0 - 30 m/min | | Max Outer Roll Diameter | 270 mm | 270 mm | | Control Unit Memory | Stores settings for 45 product types | Stores settings for 45 product types |