This will close in 0 seconds
Important Note: When transitioning back to , ensure the timer matches the current expected state. If it is currently supposed to be ON based on your schedule, cycle the manual button to ON, then to AUTO. 6. Troubleshooting Common Issues The Screen is Completely Blank
The LCD screen will flash all characters and then default to a clean state (usually 00:00 or 12:00 AM). Step 2: Set the Current Day and Time
Press the RESET button and reprogram the timer. Check that your "ON" time is earlier than your "OFF" time.
While holding , press the WEEK (or DAY ) button repeatedly until the correct day of the week appears at the top of the screen (e.g., MO, TU, WE). chevron digital timer ew-32 pdf
When finished, press the button to save changes and return to the main clock display. Understanding the Manual Override (ON/AUTO/OFF)
It features a digital LCD screen, a memory backup battery to retain settings during power outages, and a manual override button. It is commonly used for managing lamps, heating devices, air conditioners, and pool pumps. 2. Key Features and Specifications
If the display is blank, the internal battery may be dead. Plug it into a live outlet for at least 30 minutes to charge, then press the small RESET button with a paperclip. Important Note: When transitioning back to , ensure
The Chevron EW-32 allows you to set specific time triggers. You can apply schedules to single days, weekdays only, weekends only, or the entire week.
Note: Ensure the timer is in the correct state (ON or OFF) relative to your current schedule before switching to AUTO.
Follow these steps to configure your current time and schedules based on standard operating procedures for the EW-32 model. Troubleshooting Common Issues The Screen is Completely Blank
: The internal battery is completely discharged or dead.
Allows devices to run for a specific duration. 12/24 Hour Format: Switchable time display. 2. Initial Setup: Before You Start Programming
This will close in 0 seconds