Canon Service - Tool V3800 //top\\

To use the tool, the printer must first be placed in . The software will not recognize the device if it is in its normal power-on state. Step 1: Entering Service Mode

Note: For newer Canon models released after 2020, you may require a more recent software version, such as v5103 or v5302. Step-by-Step Guide to Using Service Tool v3800

Using the wrong service tool version or improper usage can permanently lock your printer's logic board (EEPROM), rendering it useless. canon service tool v3800

A confirmation dialog or a printed page (if paper is loaded) will typically confirm the success of the reset.

The is an official service utility software used by technicians to reset and maintain Canon Pixma inkjet printers. It is primarily used to clear the "Ink Absorber Full" error, which locks the printer and prevents further printing until the internal waste ink pads are serviced. To use the tool, the printer must first be placed in

This usually happens if you forgot to put the printer into Service Mode, or if your printer model is too new for version v3800. Try upgrading to version v4905 or v5302. Error Code 002 (Function Not Supported)

Over time, your printer uses a small amount of ink to clean its printhead. This waste ink is absorbed by sponges (pads) inside the printer. To prevent these pads from overflowing and causing damage, the printer tracks its cleaning and printing cycles. When this internal counter reaches a limit set by Canon, the printer will lock up and display error codes like or 1700/1701/1702/1703 . The Service Tool software can communicate directly with the printer's firmware to reset this counter back to zero. Step-by-Step Guide to Using Service Tool v3800 Using

Press the Stop/Reset button exactly 5 times (some older models require 4 or 6 times). The indicator light will alternate between green/blue and orange with each press. Release All: Release the Power button.

The Canon Service Tool v3800 is an official, proprietary software utility used by Canon technicians to calibrate, test, and reset Canon Pixma printers. While not officially distributed to consumers, various versions of this service tool have become available online to help users maintain their hardware. The Purpose of the Waste Ink Counter