To use Version 3900, the printer must first be placed into manually:
: Unplug the USB cable, restart the printer, carefully repeat the hardware button sequence to re-enter Service Mode, and try a different USB port. Error Code 002
Critical Safety Warning: Prevent "Error 006" and Logic Board Damage
: Ensure the USB cable is plugged directly into the PC (avoid USB hubs). Disconnect all other external USB devices. Physical Maintenance Notice Canon Service Tool V.3900 Download
While keeping the Power button held down, release the Stop/Reset button. Now, press the Stop/Reset button exactly 5 times (or 6 times for certain MG models). Release All: Release the Power button.
: Windows XP, Windows 7, Windows 8, or Windows 10 (32-bit or 64-bit). Mac Compatibility : This tool does not run on macOS.
Canon Service Tool V.3900 an essential utility for printer maintenance, primarily used to reset the Waste Ink Absorber Counter To use Version 3900, the printer must first
Complete Guide to Canon Service Tool V.3900: Features, Usage, and Safe Download
When a printer prints, a small amount of ink is deposited into internal absorbent pads during head cleanings. The printer estimates this usage using an internal electronic counter. Once that counter hits 100%, the printer locks down. The V.3900 software communicates with the printer firmware to reset this counter back to 0%. Key Features of V.3900
The tool will not work unless the printer is in Service Mode. Follow these steps carefully: Power Off: Ensure the printer is off but plugged in. Press & Hold: button (red triangle), then press and hold the Release & Tap: Physical Maintenance Notice While keeping the Power button
The is an essential utility for power users and technicians looking to extend the life of Canon Pixma printers, specifically those from the iP, MG, iX, and MP series. While not a standard consumer download, it is the primary solution for clearing the "Ink Absorber Full" error (often indicated by Support Code 5B00). Key Features
The printer is not in Service Mode, or the USB connection is unstable. Unplug other USB devices and try entering Service Mode again.
Ensure no other printing applications, driver updates, or print queues are active when running the utility.
Canon Service Tool V.3900 Download: The Complete Guide to Resetting Your Printer
: Clears the counter value for the waste ink absorber, allowing the printer to resume operation after a "Service Required" error.