Bnd-50 Se36 Instructions ((top))

Ensure it is used in a dry, indoor environment.

If you can tell me the you have (since BND-50 has several variations like SG3 or U6) and the types of appliances you plan to connect, I can offer more tailored advice on setting up your schedules.

: Hold down the CLOCK button and press the HOUR button until the correct hour is displayed.

: The device plugged into the timer must remain in its "ON" position for the timer to work. Indoor Use Only bnd-50 se36 instructions

Locate the small hole or button on the face of the unit.

The operating mode determines how the timer interacts with the current schedule. Press the manual override button (often labeled or MODE ) to cycle through these options:

This instrument performs automatic on electrical insulating films (both optical and metalized). It meets Chinese standards GB/T13542.3‑2006 and GB/T13542‑2009 . Ensure it is used in a dry, indoor environment

: Allows you to set multiple "ON/OFF" periods within a single day that repeat every 24 hours. 15-Minute Intervals

To have a light on from 6:00 PM to 10:00 PM, push down all segments between those two numbers on the dial. Set Current Time : Rotate the entire center dial clockwise until the arrow/triangular marker points to the current time of day.

Alternative : For panel mounting, use the four screw holes (M4 screws) at the corners of the housing. Torque to 1.2 Nm. : The device plugged into the timer must

The feature is useful for a “lived‑in” look when you are away.

: While continuing to hold CLOCK , tap the MIN button until the current minutes are reached. Release the CLOCK button to lock in the time. 2. Configuring the Scheduled ON/OFF Programs

Ideal for security, this mode turns lights on and off at random intervals between 6:00 PM and 6:00 AM.

: Plug the timer into a live power outlet for at least 2 hours (ideally a few hours) before the first use.

The HBN BND-50/SE36 relies on a internal Ni-MH backup battery to store your schedule during power disruptions. If the LCD screen arrives blank, follow these steps to prime the device: