Autocraft 1.5 Amp Battery Charger Manual
: Attach to a heavy metal part of the frame or engine block away from the battery and fuel lines. Power On : Plug the charger into a standard 120V AC outlet.
A: Normal. The internal transformer dissipates heat. If it’s too hot to touch (>140°F), unplug and check for internal short.
Tip: For long-term storage (winter), check connections monthly and ensure AC power remains on. autocraft 1.5 amp battery charger manual
Drops the output to a minimal maintenance current. You can leave the charger connected indefinitely in this stage without risking boiling or drying out the battery cells. Troubleshooting Guide Potential Cause No lights turn on No AC power or bad wall outlet
A: No – designed for 6V and 12V lead-acid only. : Attach to a heavy metal part of
attempt to charge non-rechargeable or damaged batteries. Keep away from water and rain.
A 1.5A charger takes roughly 24–48 hours to fully charge a dead standard car battery. It’s a “trickle charger” and maintainer, not a booster. The internal transformer dissipates heat
: When finished, unplug the AC cord first, then remove the Black clip, and finally the Red clip. 🚦 LED Indicator Meanings
To operate the Autocraft 1.5 Amp Battery Charger, follow these steps: