Anti-static wrist strap (recommended) or a grounded metal surface
: Two M.2 PCIe NVMe slots and one 2.5-inch SATA HDD/SSD bay.
If your CPU/GPU temperatures are exceeding 90°C, you may need to remove the copper heatsink (following the numbered screw sequence) and apply fresh high-quality thermal paste. 📋 Technical Specifications Reference
Remove the screws securing the hard drive bracket to the chassis. acer nitro an515-54 service manual
: Use a plastic pry tool (spudger) starting from the hinge area to avoid scratching the chassis. Are you planning a specific hardware upgrade or trying to troubleshoot a thermal issue
Are you opening the laptop to perform a (RAM/SSD) or for thermal maintenance ?
Insert the new M.2 SSD into the slot at an angle, press it flat, and secure it with the retention screw. 2.5-inch Hard Drive (HDD / SSD) The laptop has a dedicated bay for a 2.5-inch SATA drive. Anti-static wrist strap (recommended) or a grounded metal
He inserted his plastic spudger. He didn't just jam it in; he followed the diagram’s arrows, sliding the tool along the seam, listening for the sharp snap of the plastic clips releasing. It sounded like breaking bones, a sound that terrified novices but was music to a technician's ears.
If you are looking to perform common DIY tasks like cleaning fans or upgrading storage, follow these standard procedures for the AN515-54 model: Acer Nitro 5 AN515-55 Disassembly / Cleaning
Dual-fan cooling assembly with shared copper heat pipes spanning the CPU (left) and GPU (right). : Use a plastic pry tool (spudger) starting
To service the Acer Nitro AN515-54, prepare the following tools:
: Acer sometimes provides a Lifecycle Extension Guide for specific models, which includes detailed disassembly steps for components like the mainboard, speakers, and LCD hinges. Disassembly & Upgrade Overview Go to product viewer dialog for this item.
Before turning a single screw, you must prepare your workspace. Electronics are highly sensitive to static electricity and physical damage.
Slide the tool along the edges to release the plastic clips. Lift the bottom cover off and set it aside. Step 2: Disconnecting the Battery (Crucial) Locate the large black battery pack at the bottom. Locate the battery connector attached to the motherboard.