Acarsdeco2 Windows Verified ((new)) Info

| Feature | Parameter | What It Does | | :--- | :--- | :--- | | | --gain | Adjusts the sensitivity of the SDR dongle. You can set a fixed value (e.g., 49.6 ) or use --agc for automatic control. | | Frequency Correction | --freq-correction | Corrects for the dongle's internal oscillator drift (in parts per million, PPM). This is absolutely critical ; without proper correction, you won't decode anything. | | Set Frequencies | --freq | Specifies which ACARS frequencies to listen to. You can use this flag multiple times (up to 3) to monitor different channels (e.g., --freq 131550000 --freq 131725000 ). | | Web Interface | --http-port | Launches a built-in web server, letting you view decoded messages in a clean interface in any browser (default port is 8080). It's much easier to read than the command line scroll. | | Databases for Airlines | --frdb , --db | Points to .sqb database files containing airline and flight route info. This allows the web interface to display airline names and logos alongside the raw messages. | | Logging | --logfile | Saves all the decoded messages to a text file for later review or analysis. |

Before running the software, ensure your hardware is recognized by your Windows system.

--gain 40 : Sets the SDR gain (adjust based on your antenna). --freq 131525000 : Sets the frequency in Hz (131.525 MHz). --http-port 8080 : Sets the port for the web browser view. 5. Viewing Data acarsdeco2 windows verified

Operational metrics including OOOI events (Out of the gate, Off the ground, On the ground, Into the gate).

acarsdeco2.exe --gain 40 --freq 131525000 --freq 131725000 --freq 131825000 --http-port 8080 Use code with caution. | Feature | Parameter | What It Does

Because AcarsDeco2 talks directly to your SDR hardware, Windows must be instructed to treat the DVB-T dongle as a generic radio interface rather than a television receiver. Plug your RTL-SDR dongle into a USB port.

Here are some of its key capabilities, broken down into two types: "direct" (for listening on the same PC) and "integrated" (for sharing data across a network or to other applications). This is absolutely critical ; without proper correction,

Double-click the modified ad2.bat file to start the decoder. A command prompt window will open showing real-time data bursts.

: Set the ACARS frequencies for your region (common examples include 131.550 and 131.725 MHz).

Frequencies must sit within this window due to SDR sampling constraints. SBS (Port 30008), AD2 (Port 31008). Native feeds for external loggers or map software. Built-in Web Server Custom HTTP port configuration. Populates real-time tables, maps, and flight profiles. Step 1: Downloading & Verifying Binaries AcarsDeco2 and VRS config - FlightAware Discussions

: Supports piping decoded data to other applications like PlanePlotter or BaseStation via UDP or TCP server outputs.